Breakers

  • WGB-1 - soluble breaker

    WGB-1 is an ammonium persulfate-based breaker for use in frac fluid based on guar or its derivatives. WGB-1 can be used in fluids with a temperature of 20 - 100° C.
    Guar based frac fluids breaking:
    - gels obtained by thickening with a linear polymer
    - fluids with borate or organometallic cross-linker
    For temperatures below 40º C, it is recommended to add EB-A activator in an amount of 0.5 -1.0 l/m3.

  • WGB-2 – soluble persulfate breaker

    WGB-2 is a persulfate breaker for use in hydraulic fracturing fluid based on guar or its derivatives. Allows to increase the time after which the breaking begins. It can be used as a main breaker with a delay of breaking up to temperatures of 50° C. WGB-2 can be used in fluids with a temperature of 40 - 100° C.
    Guar based frac fluids breaking:
    - gels obtained by thickening with a linear polymer
    - fluids with borate or organometallic cross-linker

  • WBCAP-LT – low temperature encapsulated breaker

    WBCAP-LT - encapsulated breaker based on ammonium persulfate, manufactured in Russia, developed by our own technologies, is used as a breaking agent in hydraulic fracturing fluids at temperatures from 40 to 70° C. The main advantages of this product are: the deferred time of breaking due to the encapsulation of the main product, the ability to use high concentrations of the product without reducing the viscosity of the hydraulic fracturing fluid during the injection of proppant. Innovative, environmentally friendly shell of the breaker is not subject to mechanical stress, which eliminates the premature release of the active substance during its passage through the pipes and perforation zones.

  • WBCAP-HT – high temperature encapsulated breaker

    WBCAP-HT - encapsulated breaker based on ammonium persulfate, produced in Russia, developed by our own technologies, is used as a breaking agent in hydraulic fracturing fluids at temperatures from 65 to 110° C. At the request of the customer, it is possible to change the shell (coating) to allow its application to higher temperatures. The main advantages of this product are: the deferred time of breaking due to the encapsulation of the main product, the ability to use high concentrations of the product without reducing the viscosity of the hydraulic fracturing fluid during the injection of proppant. Innovative, environmentally friendly shell of the breaker is not subject to mechanical stress, which eliminates the premature release of the active substance during its passage through the pipes and perforation zones.

  • LPD-1 - series of liquid oxidative breakers

    LPD-1 - eries of liquid oxidative breakers designed to breake guar-based thickener systems. Depending on the sub-label used, LPD-1 breakerss cover a wide range of formation temperatures from 50 to 120 °C.